Cleaning Services

Product Details:

In complement to good personal hygiene, disinfection also plays a critical role in reducing viruses and bacteria. Disinfection Service involves the application of a solution, in the form of mist, to areas of your property. This treatment effectively removes 99.99% of viruses and bacteria to protect your employees, customers and family against diseases including the coronaviruses and pest-borne diseases. Improper sanitizing is one of the most common restaurant health inspection violations; and data shows that reusing a rag from table to table actually spreads germs and increases the number of bacteria on the surface after wiping (CDC). JK Engineering & Technology can help you kick the rag and bucket once and for all. JK Engineering & Technology offers a full line of no-rinse sanitizers , disinfectants and cleaners that are EPA-registered , NSF & Kosher certified, Biodegradable, Non Flammable and Neutral PH. Our Firstmate range of products provide consistent level of active ingredient every time, ensuring you kill germs effectively on food contact surfaces and meet health inspection guidelines.

Product Details:

HVAC Duct is a system used to Heating, Ventilation and Air Conditioning in which airflow from the source goes to different corners of the building. With every cycle, it takes in a certain amount of air, filters it, cools it down and directs it out across the room. This keeps happening continually throughout the day. In this course during this progression, the same air gets circulated several times during the day. In addition, our daily work habits add various pollutants to the indoor environment like dust, mites, mould, bacteria, pollen, smoke, tobacco and they all let bacteria & mould grow and circulate in our indoor work environment. Unless the HVAC ducts are well cleaned and sanitised with an appropriate disinfectant, the duct system will become a breeding ground for bacteria and virus. The air in the duct will carry these disease-causing virus and bacteria and will easily spread across the working places or rooms. This will seriously spread the disease like flu, cold, cough, fever and many more other viral diseases to employees in industries & IT hubs, patients in the hospital, guest in the hotel rooms, a visitor in the cinema hall and shopping malls, Airports, ships, Railways and aeroplane etc JK Engineering & Technology with its latest and advanced technology can effectively clean the HVAC Ducts with its own Service team. We not only clean the ducts with our duct cleaning machines but also carry out the disinfection of the ducts and video inspection before and after cleaning.

Product Details:

JK Engineering & Technology, a subsidiary of JK Group with its corporate office and manufacturing unit located in Chennai, India. JK Group is a world class service provider dealing with design, development, manufacture, and marketing of,

• Injection moulding components,
• Lifesaving medical equipment,
• Specialty maintenance chemicals, and MRO Products
• Industrial equipment’s

With exclusive tie-ups with the global market leaders, JK’s unmatched product quality and uncompromising service back-up, makes it second to none.

 

JK Engineering & Technology specialises in developing, manufacturing, and marketing of specialty chemicals and equipment in Indian market. Our commitment and eco-determination has made to create a revolutionary range of environment friendly product – Ecotreat, making us a pioneer and a leader in the market.

Product Details:

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

JK Engineering & Technology primarily offers its heat exchanger tube cleaning services onsite at our customers’ plants. At our facility, we can provide heat exchanger tube cleaning services as well as maintenance and testing services. Our technicians can then disassemble the heat exchanger and prepare a maintenance plan based on the customer’s needs. Plate type Heat Exchangers JK Engineering and Technology uses a specialised method for plate type heat exchanger cleaning which involves circulating descaling chemicals to remove deposits. Chemical cleaning of plate and frame heat exchangers works by circulating a specialized descaling agent through the cooling side or water side of the heat exchanger. While the chemical solution flows through the channels of the plate type heat exchanger it dissolves the mineral scaling and other debris. The other leading method for cleaning plate and frame exchangers is to first disassemble the heat exchanger and remove the plates to be cleaned one by one. This process can be very expensive and time-consuming. Each time a plate is removed from the frame of the exchanger and cleaned individually typically with pressurized water. The gaskets that are between the plates normally need to be replaced which also adds to the cost of the process. Because of the large amount of mechanical work involved with disassembling the heat exchanger for cleaning, chemical circulation is a much lower cost option and it generally provides the same cleanliness as cleaning the plates one at a time.

Product Details:

Condensers are the important equipment in most the manufacturing, HVAC & process industries such as Power & Steel Plant, Petrochemicals & refinery, Papers, HVAC and many other industries. An inefficient condenser can be the reason for huge losses in terms of high energy consumptions, production losses etc. The major reason for the inefficient condenser is the loss of heat exchanging capacity due to water-born deposits. It is necessary that condensers are cleaned periodically and must not wait for heavy fouling of tubes. There are various cleaning method is adopted to ensure that condenser tubes are maintained utmost clean all the times and a well-thought plan are in place for preventive maintenance. Following are the technology used for cleaning the tubes and the technology is selected based on time available for cleaning and intensity of deposits. Many times one or more technology is combined for effective cleaning.

1. Bullet/Projectile cleaning:-Mainly used for preventive maintenance and in case of a short shutdown period. Bullet cleaning is less time consuming, however, may not be effective for heavy and very hard deposits.

2. Water Jetting:-A traditional method of cleaning the condenser tubes. Though it is effective, sometimes it takes more time and requires highly skilled labour and safety always a concern.

3. Chemical Cleaning:- Highly effective for hard water deposits & takes less time for cleaning. However, application method and selection of the right chemical plays a key role.

4. Mechanical brushing:-Mechanical brushing is another effective cleaning method adopted in industries. However, the proper size of brush and type of brush is important for the effectiveness of the cleaning. It takes more time for cleaning the complete system.

JK Engineering & Technology is well equipped with all the types of machines and has skilled technicians to carry out the complete contract job effectively and within the time schedule. JKET can offer very safe, environmentally friendly and highly effective chemicals for cleaning the condenser tubes. AIR COOLER CONDENSER ( ACC)/FIN FAN COOLER : Fin Fan Cooler or Air Cooler Condensers are mainly used in Power plant, steel plant, Refinery and other process industries as an effective heat exchanger

Product Details:

Steam has the ability to penetrate deeply into the microscopic structure of any material through the extremely small size of the droplets. When steam exits from a tool, such as for example a lance or a squeegee or an industrial belt cleaner, it's temperature is anywhere between 100°c to 140°c. The steam is in a gaseous state as it exists and remains so for a distance of 10mm to 30mm, depending on the specific machine or tool and how it is set up. As this gaseous steam hits the surface of any given material, the microscopic droplets enter the porous structure of the material and then cool down, leading to a change in the surface tension and, just as with a detergent, the contaminants will float up because the steam with its heat acts as a surfactant with the ability to emulsify grease, fat, oil etc... The difference to a detergent is that a detergent cannot penetrate deeply into the surface structure, so that superficial dirt is removed, but not what's deep down inside. Most of the steam will evaporate, leaving a minimal amount of moister that needs to be removed with a microfiber cloth or vacuumed up. At that point, the surface will be completely dry and without any residue and perfectly sanitized. Just as a detergent works better in hot water than cold water, steam works far better than a detergent and hot water. Another interesting point is to look at how steam interacts with microorganisms. Many microorganisms protect themselves from external chemical agents through what is called biofilm. The organism encapsulates itself in this biofilm and firmly adheres to almost any surface. To break down the biofilm with conventional methods is very difficult, time-consuming, potentially harmful to the operator's health, expensive and or destructive to materials. Also, different biocides are required for specific microorganisms/pathogens. Steam, in turn, readily breaks down the biofilm for easy removal and the heat causes the cell core of the microorganism to be destroyed. No other technology can offer such an excellent result in sanitation with such extreme simplicity and efficacy! The use of a vacuum or degreaser and a tool, such as a brush, that adds mechanical action to the steam. Or just a sufficiently strong jet of steam that can blast/rinse a contaminant away is also a very viable solution in some applications. Last but not least, steam neutralizes odours as a side effect without any need to use perfuming chemicals/substances to cover up unpleasant odours.

 

Product Details:

JK Engineering & Technology offers high-pressure water jetting services with 10,000 to 20,000 PSI. High-pressure water jetting is used to remove hard build-up from any surfaces. Water jetting has a multitude of applications such as tank cleaning, pipeline cleaning, paint removal, heat exchanger tube cleaning, heat exchanger bundle cleaning, and many others. JK Engineering & Technology has the capability to handle all types of high-pressure water jetting projects. JK engineering & Technology ensures all employees are properly trained with regard to safe operations & safety procedures are followed to complete each project on time and safely.

Product Details:

The efficiency of the Air-Cooled condensers gets affected over a period of time due to deposition of insects, birds dropping, coke fines, Cement particles, coal dust and other foreign matter and for the efficient working of the coolers, the same have to be removed on a regular basis as they restrict airflow. JK engineering and Technology provide a complete solution in which we remove accumulations of organic and inorganic deposits such as Oils, dust, dirt and caked products formed on particularly intricate inaccessible areas that inhibit heat transfer. We apply a heavy thick foam into and around the cooler's fins. Foam has a highly penetrative property which is an important factor in the cleaning process.
It has proven to be more efficient and faster than traditional cleaning. Normal water jetting cleaning fragile ling fins, compacts dirt and debris into the centre of the cooling unit, thus significantly reducing cooling efficiency. On the other hand, the foaming process is a low-pressure cleaning method, which gently soaks away dirt and debris throughout the entire system. Foam cleaning is employed to clean and neutralize the flammable dust such as coal powder etc in power plant, steel, cement industries civil structure and food and beverage industries. Foam technology is used for cleaning tanks and building structures fast without erecting scaffolding

Product Details:

Cleaning mining Equipment manually takes lots of effort, time and labour and its many time not effective. JK Engineering & Technology provides exclusive range of product to deliver the best results. JK Engineering & Technology equipment is commonly used in mining workshops, transport depots and mining production factories. JK Engineering & Technology provide high vacuuming, high-pressure jetting, foam cleaning, and high-temperature steam cleaning for regular, maintenance of Earthmoving Equipment. Our services aim to support our customers in their compliance with industry laws and regulations, whilst maintaining a professional and reputable corporate image.

Product Details:

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.