Aerosol Chemicals

Product Details:

ET 60 is a unique formulation designed for rapid penetration into the rusted bolts, parts and other components and loosen or frozen parts. ET 60 is fast acting, low surface tension, low viscosity & very thin film oil with less weight which penetrates hard to reach area. It has excellent capability of displacing the moisture, grease and oils from the surfaces. Its quick action in penetrating to the minutest crack help in quickly free the rusted parts, threaded bolts, connections and frozen parts without damaging during disassembling. ET 60 is an environmental friendly & safe to use product with 360° spray technology.Store in a cool place below 50°C away from any heat

Features

• Very fast penetrating oil & release fluid
• Much less density then water results in excellent penetrating power
• Does not contain any chlorinated solvent or ozone dipleting chemical
• 360° Valve technology anables to spray in all the directions

Applications

• Very fast penetrating oil & release fluid
• Much less density then water results in excellent penetrating power
• Does not contain any chlorinated solvent or ozone dipleting chemical
• 360° Valve technology anables to spray in all the directions

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application

Product Details:

ET 80 is a multipurpose lubricant, rust penetrant, cleaner and corrosion inhibitor. it forms a thin light film on the surface and penetrates deep to displace the trapped moisture and form a protective film to seal out further moisture and protect against corrosion. ET 80 is a low surface tension liquid which penetrates into the rusted parts, threads and bolts to loosen the frozen or seized parts. Its non-staining light lubricant film act as a lubricant and rust protector in both indoor and outdoor application for medium terms.Store in a cool place below 50°C away from any heat.

Features

• Multipurpose lubricant cum cleaner
• Excellent rust protector
• Displaces moisture & water
• Penetrate rust & corrosion
• 360° valve technology enables to spray in any direction

Application

• ET 80 is an excellent lubricant cum cleaners
• Penetrates and release rusty and /or jammed components
• Displaces moisture from the vehicle ignition system and aids starting & smooth running
• Spray of ET 80 overall distribution leads and all electrical components to prevent induced faults
• Lubricant & restore smooth & silent operation of chains, hinges, bearing. locks, drawer's runners, tracks.
• An excellent corrosion protector for short term during storage or production
• ET 80 has numerous application in each and every industries and a handy tool for every technicians

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application

Product Details:

Features

• Eliminates frictional heat and reduce overheating or seizing & galling
• Increase parts life
• Increase the life of tool, production quality & overall efficiency
• Operating temperature -200°Cto 450°C
• Non-CFC propellant

Application

• Lubricating for texting machinery subject to high speed & sliding motion
• Excellent usage for cams, pins, chains, slideways, matting parts, springs
• Use as an additive for mineral oil for improving load and extreme pressure carrying ability
• Used as heavy-duty, high-temperature thread compound to prevent seizure, galling & corrosion
• Excellent anti-friction coating for metal cutting tools as millers, gear cutters, taps, reamers, drills, punches etc.

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 100 contains micro-fine solid lubricants packed with high-performance anti-wear additives. A thin layer of ET100 can provide excellent dry lubrication and has the capability of withstanding very high load under the hostile operating condition of high temperature. ET 100 is electrically conductive and has very good resistance to wear and chemical.Store in a cool place below 50°C away from any heat

Features 

• Oil free luricants for sliding application, quick bonding, fast drying

• Excellent corrosion resistance property withstands high temperature up to 450°C plus

Application

• ET 100 is designed for lubricating valves, slides, springs, cams, guideways, matting components Packaging machines, chutes

• Textile machines

• High-temperature gasket & rubber assembly compound

• Electrically conductive lubricant

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application

Product Details:

ET 111 is designed for insulating & protecting electrical windings and equipment by sealing out water & moisture. A fast air-drying varnish which forms a hard flexible protective coating with exceptional film adhesion capacity on the metal surfaces. ET111 is highly resistant to chemical attacks, oxidation, corrosion, oils and will not pick up dust & dirt. It has very high temperature withstanding capacity up to 180°C and has been classified as class H insulation material with the excellent antitracking property.
Application

• Insulate and seal out moisture from motor windings, bus bar, commentator, stator coils, electrical windings.
• Printed circuit boards
• Strengthen & repair worn out and damaged insulations
• Prevent short-circuiting & flashover in bus bars, cable termination, joints & connections

Features

• Fast air drying and completely seals out moisture
• Ultra-high dielectric strength

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 104 is a unique wax-based rust protector formulated for long term protection for all metal surface. The firm wax film can provide corrosion protection to metal surfaces both indoor and Outdoor condition for up to 2 years. It has a very high resistance to high resistant to humidity, salt spray and chemical fumes by forming a protective coating against potential corrosion catalyst. ET 104 is safe on all metals, rubbers, plastics & painted surface and is ideal for long term protection for the components during storage or shipments.

Feature

• High resistant to humidity and salt spray, easy in removal

Application

• Long term protection up to 2 years for both indoor and outdoor storage
• Protection of metal surface during transit
• Storage and prior to assembling of components
• Suitable for cranks, engine assemblies
• Bearings, gears, valves, spindles, chains & hoists, wire ropes, steel cables
•  Dies & moulds, lathes, mechanical instruments, precision components, parts in shipment
• Automotive components

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 116 is an extreme pressure heavy-duty liquid grease fortified with MoS2 solid Lubricant. It has a very high capacity of withstanding extreme pressure and continue the wire rope in the adverse condition of loads, temperature and environment. ET 116 rapidly penetrates the wire rope strands and gives a thin lubricating film both inside and outside of the wire rope which provides both lubrication and protection against corrosion. The MoS2 solid lubricant helps in preventing wear among the strands and extend the life of the wire rope.Store in a cool place below 50°C away from any heat

Features

• Excellent resistance to water washout and have very high penetrating capacity
• ET 116 has very high load carrying capability

Applications

• An excellent lubricant cum corrosion protector for all kinds of metal wire rope
• Pulleys, chain, hinges, conveyors hoist
• Forklifts and other material handling equipments
• Reduces the friction between the strands when the ropes in use
• Protect the surface of the strand from corrosion and rust
• Increase the reliability & life of the wire rope

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application

Product Details:

ET 103 is a unique formulation of synthetic base fluid which has excellent adhesion power and fortified with extreme pressure and friction-reducing additives. ET 103 reaches the innermost area and forms a highly stable film on the surface for providing effective lubrication under severe load and extreme pressure. ET 103 is designed to perform under adverse conditions of high temperature, chemical attack, both hot and cold water environment. its special adhesion properties ensure that it holds on the surface during operation and does not throw off or drop to ensure effective lubrication.Store in a cool place below 50°C away from any heat

Features

• Penetrates well
• Minimizes wear & extends chain life
• Excellent corrosion protection against water, hot & cold weather and saline environment

Application

• Industrial chain operating under a harsh condition like severe exposure to moisture, water, steam
• Dust & dirt environment
• Can be applied for lubrication on break/clutch levers
• Wire rope
• Gear drives, bearing

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application

Product Details:

ET 77 is a unique solvent-based electrical contact cleaner designed specifically for electrical maintenance. ET 77 is a high purity, fast-drying, non-conductive, non-flammable & non-toxic cleaner for sophisticated equipment. ET 77 is safe to use on most plastic, metals, paints, rubbers and other electrical insulation material .
Features

• Non-flammable & fast evaporation, residue less fluid ensure perfect cleaning with user friendly
• Extend life & reliability of the equipment
• 360° valve technology enables to spray ina any

Application

• Contact cleaner for electrical equipment such as motors, contactors, coil, relays
• Switches, connection circuits brakes, plugs & jacks
• Generators, electric & electronics contact, PCB's
• Bus bars, capacitors, aviation communication & electronics equipment's

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 88 is a multifunctional electrical grade cleaner, lubricant, moisture displacer and corrosion inhibitor. ET 88 form a thin lubrication film which penetrates the deep into the surface and displaces the moisture thereby leaving and conductive protective film to seats our further moisture and protect against corrosion attack. ET 88 is safe to use on all metals, rubbers, plastics or any other insulation materials.
Features

• Excellent hydrophobic moisture displacer  cum protective coating
• Very safe on plastic, varnishes and other protective insulation. Protect against moisture & corrosion,
• 360° valve technology enables to spray in any direction

Application

• Cleaner cum moisture displacer
• Prevention of arcing/sparking in HT/LT bus bars & insulator
• An Excellent IR improves for motors, cable ends, solenoids, control terminals, capacitors, transformers and electrical assembles due to moisture increase

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

Features 

• Simple to operate - minimal training required
• Stainless steel construction - long life
• Speed control - set shaft rotation at optimum speed for each application
• Interchangeable cleaning tools - versatile
• Large pneumatic tires and heavy-duty contractor dolly - easy to move
• Simultaneous cleaning solution injection and water power flush up to 500 PSI at 2.2 GPM (35 BAR at 8.3 LPM) - removes deposits
• Foot switch activation - safe operation
• Flexible Shaft Speed:Variable, 200-800 rpm

Application

• Residential and commercial chillers tubes like Carrier, York, TRANE and more.
• Shell and Tube Heat Exchangers, oil coolers and more.
• Marine heat exchanger tubes
• Heat exchanger tube cleaning
• Ideal for Manufacturing Plant, Machinery Repair Shops

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 40 is non-flammble solvent based heavy duty degreaser for removing carbon, stubborn grease, oils, and flushes out dirt, soils, solids, oxides, silicones and other foreign material deposits on the electromechanical equipment. ET 40 is a very aggressive cleaner which can penetrate very fast evaporates within no time without leaving any residue on the cleaning surfaces.

Features

• Non-conductive fluid & residue less
• Safe on all metal
• Fast penetrating & cleaning action

Application

• Residential and commercial chillers tubes like Carrier, York, TRANE and more.
• Shell and Tube Heat Exchangers, oil coolers and more.
• Marine heat exchanger tubes
• Heat exchanger tube cleaning
• Ideal for Manufacturing Plant, Machinery Repair Shops

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 99 is a solvent-based, high pure, plastic and metal safe degreaser. It has been designed to clean effectively electrical and electronic contacts, connections, PCB and sensitive electronic instrument safely. ET 99 is a user friendly and rapidly penetrates the surface and removes of films, dust dirt, carbon, moisture and other contaminants quickly there by restoring the electrical and electronic properties of the components.

Features

• Safe on most plastics, metals, rubber & insulation materials
• Extend the life of the equipment & performance reliability
• Prevents intermittent failure of the equipment due to arcing, tracking, short circuit & corona discharge

Application

• ET 99 is designed for cleaning all electrical and electronic part like PCB
• Contacts
• Switches, connectors
• Motors
• Circuit breakers & plugs

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 44 is a very unique solvent-based degreaser designed for cleaning without affecting most of the paints, plastics and safe on metals. It is a fast-acting and fast-drying cleaner does not leave any residue on the surfaces. ET 44 effectively cleans oils, greases, silicon, dirt, soils, oxides carbon and other foreign materials effectively & safely.

Features

• Does not affect,  rubber safe on metal, most plastic, paint, & ceramics

Applications

• Designed specially to clean/degrease mechanical part/components with light contamination, lint, dust, oil & grease safely
• Mechanical equipment such as brakes, chains, dies, pumps, forklifts, valves, power tools

Product Details:

ET 55 is designed to flush out old stubborn grease, oils, foreign particles, hard carbon & oxides on mechanical equipment like bearings, heard, chain, engines, valves, pumps etc. Its has been designed to reach the inaccessible area where practically hand cleaning may not be possible due to paucity of spaces. ET 55 is a safe, non-flammable, aggressive based degreaser which can penetrate and dries fast for an effective residue less cleaning.Store in a cool place below 50°C away from any heat

Features 

• Jet spray flushed out the greases and oils from inside the parts

•  Does not content TCE or any ozone-depleting chemicals

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application

Product Details:

ET 120 is a very unique solvent-based degreaser specifically designed for mould & die cleaning, mechanical components without affecting most of the paints, plastics and safe on metals. It is a fast-acting and fast-drying cleaner does not leave any residue on the surfaces. ET 120 effectively cleans oils, greases, silicones, dirt, soils, oxides, carbons and other foreign material effectively & safely. ET 120 Cleans faster with less manual effort and increase productivity
Features

• Does not affect rubber safe on metals, most plastics, paint & ceramics

Application

• Designed specifically to clean/degrease mould, Die & mechanical part/components with light contamination, lint, dust, oils & grease safely
• Mechanical equipment such as brakes, chains, gears, bearings, clutches, generators, molds, dies, pump, forks lifts, valves, power tools

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 107 is a specialised unique synthetic lubricant fortified with a conditioning additives for improving the belt gripping and preventing belt slippage in all type of rubber belt. It prevents premature belt wearing, eliminates belt squealing thereby reducing the noise. ET 107 helps in reconditioning the damaged belt and hardness which reduces slippage and cracking.Store in a cool place below 50°C away from any heat

Features

• Save energy losses and improve equipment efficiency, reduces noises,  slippage and premature failure of the belts
• Maintains flexibility & increase tensile strength

Application

• ET 107 is designed for preventing slippage, improving grippe and revitalizing the belt life in all types of rubber belts
• For use on all-round, flat & V belt in compressors, fans, motors, pumps
• Textile machines
• Conveyor systems and Automotives

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application

Product Details:

ET 102 is a copper-based anti-seize compound packed in a convenient aerosol packing. Exclusively designed for components like threaded bolts & nuts connection and other accessories which are exposed which temperature and corrosive environments. ET 102 is free from nickel & lead and has an operating temperature -20 to 1200C.

Features 

• Service temperature -20°C to 1200°C
• Makes disassembly easy and reduce the repair and maintenance time
• Prevents breakage/damage of components, bolts & threads

Application

• ET 102 is designed to protect all threaded flange and matting surface against seizing and galling either for long against seizing and galling either for long operation at normal temperature or exposed to a very high temperature suitable for furnaces to very temperature suitable  for furnace, boiler, autoclaves

Product Details:

ET33 is a unique blend of high quality solvent with penetrating additives which act fast in removing paint, adhesive, gasket, lacquer & varnishes without excessive usage which damages the surfaces. ET33 is also effective in removing carbon deposits and hard greases from the surfaces without having any adverse effect on the metals.

Features

• Quickly react on the surfaces
• Protect surface Finnish from excessive scarping

Application

• Residential and commercial chillers tubes like Carrier, York, TRANE and more.
• Shell and Tube Heat Exchangers, oil coolers and more.
• Marine heat exchanger tubes
• Heat exchanger tube cleaning
• Ideal for Manufacturing Plant, Machinery Repair Shops

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 112 is a pure zinc coating designed to provide galvanic corrosion protection in metal structures. It stops rust creepage and is high resistant, saline environment, water, corrosion and chemicals. ET 112 has an excellent bonding capacity and adheres to surface without much surface preparation
Features

• Long life and aesthetically acceptable
• Offers long term protection
• Very good resistant to abrasion

Application

• Equipment/steel structure exposed to the corrosive atmosphere like a transmission tower
• Wind turbine
• Storage tanks
• Transformers
• Electrical structures
• Ligh posts erected in chemical plants
• Saline environment and inside the manufacturing plant
• Transmission tower, metal roofing's

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 108 has been developed specifically for chain exposed to high temperature, high load, heavy wear and friction applications. The additive package used in ET 108 has an exceptional load-carrying ability. It has a very high resistance to high-temperature oxidation and had a low evaporation rate. It has excellent resistance to water washout, steam and humidity and outstanding ability in adhesion.Store in a cool place below 50°C away from any heat

Features

• Operating temperature is 200°C Plus
• Resistant to wash off by hot & cold water
• Low evaporation rate at high temperature
• Saves cost by extending the life of the chain & by avoiding the frequent maintenance

Application

• Conveyor chains
• Slide ways
• Hinges Operating at very high load and temperature

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application

Product Details:

ET 144 is a clear and transparent dry coating designed for printed circuit board and other electronic & instrument components for protection against corrosion, moisture, dust, dirt, steam, chemical attack & contaminants. Improves the performance & working reliability of the printed circuit board. Provides the mechanical environmental protection, prevents short-circuiting, corrosion of conductors and solder joints.
Features

• Cured at room temperature
• Extend working life of equipment
• Improves the reliability of the equipments
• Fast, drying and easy to apply, moisture & chemicals resistant
• Easy removal whenever is required
• Film conductive for solder through repair

Application

• Sigle component air drying conformal coating
• Designed to protect the PCB from dust, dirt, moisture, corrosion due to chemical exposure
• Vibration
• Salt spray
• Humidity and high temperature related failure

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

Features

• Comply with RoHS and other international  norms
• Plastic safe
• Wet type/medium oiliness
• Improves the release cycles

Application

• Silicone-free mould release agent designed for the full clean release of dies and mould during the production process
• Brightens and give a clean look to the plastic surface
• Used as impression removers and glass improves before dispatch of finished products
• Suitable for food packaging moulds

Store in a cool place below 50°C away from any heat

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application

Product Details:

Features

• Simple to operate - minimal training required
• Stainless steel construction - long life
• Speed control - set shaft rotation at optimum speed for each application
• Interchangeable cleaning tools - versatile
• Large pneumatic tires and heavy-duty contractor dolly - easy to move
• Simultaneous cleaning solution injection and water power flush up to 500 PSI at 2.2 GPM (35 BAR at 8.3 LPM) - removes deposits
• Foot switch activation - safe operation
• Flexible Shaft Speed:Variable, 200-800 rpm

Application

• Residential and commercial chillers tubes like Carrier, York, TRANE and more.
• Shell and Tube Heat Exchangers, oil coolers and more.
• Marine heat exchanger tubes
• Heat exchanger tube cleaning
• Ideal for Manufacturing Plant, Machinery Repair Shops

Directions for use : shake can briskly before use. Hold can uprightly and spray from a distance of 10-12 inch use extension tube for pinpoint application
Store in a cool place below 50°C away from any heat

Product Details:

ET 109 is a highly specialised coating designed for electrical equipment & porcelain insulators for used as anti track and electrical insulation coating. ET 109 has excellent surface finish with the fast air-drying property. It has a very high resistance to moisture and will not pick up dust and dirt thereby avoids tracking and short-circuiting. ET 109 has the ability to withstand high temperature and chemical exposer.Store in a cool place below 50°C away from any heat

Features

• The transparent colour will match the surface colour & superb surface finish
• Avoid picking up dust, dirt and moisture

Application

• Excellent insulation and tracking property
• Designed specifically for porcelain insulator for avoiding tracking and arching
• Strengthen & repair worn out & damaged insulation
• Prevent  short-circuiting & flashover in bus bars, cable termination, joints & connections

Directions for use :

• Shake can briskly before use.
• Hold can uprightly and spray from a distance of 10-12 cm .
• Use extension tube for pinpoint application