Owing to the rich industrial experience and expertise in this business, we are engaged in providing ET 207 Electrical Insulation Filler Tape.
Description: ET207 is a self- amalgamaUng butyl rubber tape used on solid dielectric low voltage for electrical insulation and filling in around irregular shaped connectors. The tape comes with a separator that is removed during the taping process. Its 3,175 mm thickness and quick amalgamation facilitates a rapid, void free insulation build-up that is electrically stable and moisture proof. The tape conforms easily using just finger pressure. Once applied ET207 should be overwrapped with ET2O1 high voltage rubber tape for best result.
Electrical insulation of splices and other connections on low voltage cable.
Filling in around split bolt and other irregular shaped connectors
Padding bus-bar connections
Moisture sealing high voltage splice ground leads.
We are the most trusted name amongst the topmost companies in this business, instrumental in presenting ET 204 PIB Self Amalgamating Tape.
ET204 is self-amalgamating PIB (polyisobutylene rubber) medium voltage tape that provides good electrical properties for general purpose applications. Good conformability, easy to apply.
Insulating and jacketing of sphces on power cables from 600 volts through 15kV. Building stress cones and jacketing of terminations on power cables from 600volts through 15kV. Insulating and moisture sealing of telecommunication cable connections in base stations, antennas and aerial feeders. Insulati ng and protecting bus components.
Enriched with years of experience in the industry, we are engaged in offering ET 210 Silicone Rubber Cold Shrink Tube.
Description: ET21O is a cold shrinkable tube made of silicone rubber which has been expanded and put up on a removable core. Once the tube is properly placed over the connector area, the core is pulled out and the tube shrinks tighUy onto the cable jacket providing electrical and mechanical protecon as well as a moisture seal of the splice or terminahon. ET21O can be used on all solid dielectñc up to l000Volts as well as wireless coaxial and optical fiber cables. It resists corrosion, chemicals , ultraviolet light and ozone. Although not required, ET21O can be combined with ET208 Rubber Mastic tape to achieve an even better water seal.
Primary electrical Insulation and moisture sealing in splices and terminations of solid dielectric power
cable up to l000VoIts
Insulating and moisture sealing of coaxial and optical fiber telecommunication cable connections.
Use where superior resistance to ultraviolet light and other weathering is desired.
Other moisture sealing and mechanical protection applications.
With vast industrial experience, we are involved in offering a wide range of ET 201 EPR High Voltage Insulation Tape.
Description: ET201 is a selfamaIgamating ethylene propylene rubber (EPR) tape is used on solid dielectric cable for electrical insulation and jacketing in splices up to 69kV and for building stress cones in terminations up to 35kV. The tape comes with a separator that is removed during the taping process. Its 016mm thickness and quick amalgamation facilitates a rapid, void free insulation build-up that is electrically stable and moisture proof. ET2O1 is suitable for use with conductors rated at 90° with an emergency overload rating of 130°C. The tape is also resistant to corrosion, chemicals and ultra violet light. ET2O1 fully meets the table 1 requirements for Type Ill tape in ASTM 04388.
Electrical Insulation and jacketing in splices of solid dielectric cable up to 69kV.
Building stress cones in terminations of solid dielectric cable up to 35kV.
Jacketing of indoor terminations.
Bus bar insulation and corrosion protection.
Jacket repair and restoration in all types of cable.